Plate Bracket Install Guide
Tools needed : Phillips head screw driver
Install time: 10 minutes
Difficulty: Easy
- Start by deciding where you want the plate to go. The bracket needs to securely mount to the lower grille and use the pre existing holes in the license plate.
- Fully open the bracket by unscrewing the silver M4 bolt.
- Insert the bracket into the lower grille to hook it over the front and back.
- Tighten the silver M4 bolt to securely clamp the bracket onto the grille. Hand tighten only! Do not overtighten as it can damage the bracket.
- Undo the black M5 bolt and loosely attach the plate to the bracket, just enough to hold it in place while you position it.
- Swing the plate up to reveal where to locate the mounting position for the second bracket.
- Install the second bracket then tighten both black M5 bolts to secure the plate to the grille.
- Test the fit by giving the plate a wiggle and say "that's not going anywhere mate" so it doesn't go anywhere.